2014年5月16日，歐盟在官方公布了原LVD指令（2006/95/EC）新的協調標準清單（OJ C 149, 16.5.2014, p. 33–141）。其中2013年出版的協調標準如下表所示。我們可以看出EN 50117“同軸電纜”（Coaxial cables）和EN 50288“用于模擬和數字通信及控制的多元件金屬電纜”（Multi-element metallic cables used in analogue and digital communication and control）系列標準有大批量更新。
表中第四欄的“DOC”為“被替代標準的推斷符合性中止期”：對于新版標準，到達該日期，被替代標準（舊版標準）及其增補件將不再具有推斷符合性；對于標準的增補件，達到該日期，標準必須與此增補件一起使用，才具有推斷符合性。我們從表中也可以看出，在歐盟，一般新標準與舊標準的過渡期為三年，譬如2013年發布的標準，其執行日期通常為2016年。
標準編號
標準名稱
采用國際標準
DOC
EN ISO 11252:2013
Lasers and laser-related equipment — Laser device —Minimum requirements for documentation
ISO 11252:2013
EN 50085-1:2005/A1:2013
Cable trunking systems and cable ducting systems for electrical installations — Part 1: General requirements
2016-05-20
EN 50117-1:2002/A2:2013
Coaxial cables — Part 1: Generic specification
2016-06-17
EN 50117-2-1:2005/A2:2013
Coaxial cables — Part 2-1: Sectional specification for cables used in cabled distribution networks — Indoor drop cables for systems operating at 5 MHz - 1 000 MHz
2016-07-01
EN 50117-2-2:2004/A2:2013
Coaxial cables — Part 2-2: Sectional specification for cables used in cabled distribution networks — Outdoor drop cables for systems operating at 5 MHz -1 000 MHz
2016-07-01
EN 50117-2-3:2004/A2:2013
Coaxial cables — Part 2-3: Sectional specification for cables used in cabled distribution networks —Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz
2016-07-01
EN 50117-2-4:2004/A2:2013
Coaxial cables — Part 2-4: Sectional specification for cables used in cabled distribution networks — Indoor drop cables for systems operating at 5 MHz -3 000 MHz
2016-07-01
EN 50117-2-5:2004/A2:2013
Coaxial cables — Part 2-5: Sectional specification for cables used in cabled distribution networks — Outdoor drop cables for systems operating at 5 MHz -3 000 MHz
2016-07-01
EN 50117-4-1:2008/A1:2013
Coaxial cables — Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 —Indoor drop cables for systems operating at 5 MHz - 3 000 MHz
2016-06-17
EN 50288-1:2013
Multi-element metallic cables used in analogue and digital communication and control — Part 1: Generic specification
2016-03-18
EN 50288-2-1:2013
Multi-element metallic cables used in analogue and digital communication and control — Part 2-1: Sectional specification for screened cables characterised up to 100 MHz — Horizontal and building backbone cables
2016-03-18
EN 50288-2-2:2013
Multi-element metallic cables used in analogue and digital communication and control — Part 2-2: Sectional specification for screened cables characterised up to 100 MHz — Work area and patch cord cables
2016-03-18
EN 50288-3-1:2013
Multi-element metallic cables used in analogue and digital communication and control — Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz — Horizontal and building backbone cables
2016-03-18
EN 50288-3-2:2013
Multi-element metallic cables used in analogue and digital communication and control — Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz — Work area and patch cord cables
2016-03-18
EN 50288-4-1:2013
Multi-element metallic cables used in analogue and digital communication and control — Part 4-1: Sectional specification for screened cables characterised up to 600 MHz — Horizontal and building backbone cables
2016-03-18
EN 50288-4-2:2013
Multi-element metallic cables used in analogue and digital communication and control — Part 4-2: Sectional specification for screened cables characterised up to 600 MHz — Work area and patch cord cables
2016-03-18
EN 50288-5-1:2013
Multi-element metallic cables used in analogue and digital communication and control — Part 5-1: Sectional specification for screened cables characterized up to 250 MHz — Horizontal and building backbone cables
2016-03-18
EN 50288-5-2:2013
Multi-element metallic cables used in analogue and digital communication and control — Part 5-2: Sectional specification for screened cables characterized up to 250 MHz — Work area and patch cord cables
2016-03-18
EN 50288-6-1:2013
Multi-element metallic cables used in analogue and digital communication and control — Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz — Horizontal and building backbone cables
2016-03-18
EN 50288-6-2:2013
Multi-element metallic cables used in analogue and digital communication and control — Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz — Work area and patch cord cables
2016-03-18
EN 50290-2-23:2013
Communication cables — Part 2-23: Common design rules and construction — Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables
2016-09-16
EN 50290-2-25:2013
Communication cables — Part 2-23: Common design rules and construction — Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables
2016-09-16
EN 60061-1:1993/A49:2013
Lamp caps and holders together with gauges for the control of interchangeability and safety —Part 1: Lamp caps
IEC 60061-1:1969/A49:2013
2016-04-02
EN 60061-2:1993/A46:2013
Lamp caps and holders together with gauges for the control of interchangeability and safety —Part 1: Lamp caps Part 2: Lampholders
IEC 60061-2:1969/A46:2013
2016-04-02
EN 60061-3:1993/A47:2013
Lamp caps and holders together with gauges for the control of interchangeability and safety —Part 1: Lamp caps Part 3: Gauges
IEC 60061-3:1969/A47:2013
2016-04-02
EN 60127-4:2005/A2:2013
Miniature fuses — Part 4: Universal modular fuse-links (UMF) — Through-hole and surface mount types
IEC 60127-4:2005/A2:2012
2016-01-11
EN 60127-7:2013
Miniature fuses — Part 7: Miniature fuse-links for special applications
IEC 60127-7:2013
EN 60143-2:2013
Series capacitors for power systems — Part 2: Protective equipment for series capacitor banks
IEC 60143-2:2012
2016-01-15
EN 60252-1:2011/A1:2013
AC motor capacitors — Part 1: General — Performance, testing and rating — Safety requirements— Guidance for installation and operation
IEC 60252-1:2010/A1:2013
2016-10-03
EN 60252-2:2011/A1:2013
AC motor capacitors — Part 2: Motor start capacitors
IEC 60252-2:2010/A1:2013
2016-10-03
EN 60335-2-2:2010/A1:2013
Household and similar electrical appliances — Safety — Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
IEC 60335-2-2:2009/A1:2012
2015-12-20
EN 60335-2-6:2003/A13:2013
Household and similar electrical appliances — Safety — Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
2015-11-20
EN 60335-2-7:2010/A1:2013
Household and similar electrical appliances — Safety — Part 2-7: Particular requirements for washing machines
IEC 60335-2-7:2008/A1:2011 (Modified)
2015-11-20
EN 60335-2-17:2013
Household and similar electrical appliances — Safety — Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances
IEC 60335-2-17:2012
2015-04-30
EN 60335-2-27:2013
Household and similar electrical appliances — Safety — Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
IEC 60335-2-27:2009 (Modified)
2014-11-21
EN 60335-2-34:2013
Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors
IEC 60335-2-34:2012
2015-06-27
EN 60432-3:2013
Incandescent lamps — Safety specifications — Part 3: Tungsten-halogen lamps (non-vehicle)
IEC 60432-3:2012
2015-08-08
EN 60519-4:2013
Safety in electroheating installations — Part 4: Particular requirements for arc furnace installations
IEC 60519-4:2013
2016-07-24
EN 60519-10:2013
Safety in electroheating installations — Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications
IEC 60519-10:2013
2016-03-29
EN 60519-12:2013
Safety in electroheating installations — Part 12: Particular requirements for infrared electroheating installations
IEC 60519-12:2013
EN 60529:1991/A2:2013
Degrees of protection provided by enclosures (IP Code)
IEC 60529:1989/A2:2013
2016-10-03
EN 60598-2-8:2013
Luminaires — Part 2-8: Particular requirements —Handlamps
IEC 60598-2-8:2013
2016-06-03
EN 60598-2-11:2013
Luminaires — Part 2-11: Particular requirements —Aquarium luminaires
IEC 60598-2-11:2013
2016-06-20
EN 60598-2-12:2013
Luminaires — Part 2-12: Particular requirements — Mains socket-outlet mounted nightlights
IEC 60598-2-12:2013
2016-06-03
EN 60598-2-24:2013
Luminaires — Part 2-24: Particular requirements —Luminaires with limited surface temperatures
IEC 60598-2-24:2013
2016-07-24
EN 60670-1:2005/A1:2013
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 1: General requirements
IEC 60670-1:2002/A1:2011 (Modified)
2017-12-31
EN 60670-24:2013
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment
IEC 60670-24:2011 (Modified)
EN 60688:2013
Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
IEC 60688:2012
EN 60695-2-10:2013
Fire hazard testing — Part 2-10: Glowing/hot-wire based test methods — Glow-wire apparatus and common test procedure
IEC 60695-2-10:2013
EN 60695-11-10:2013
Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods
IEC 60695-11-10:2013
2016-06-25
EN 60934:2001/A2:2013
Circuit-breakers for equipment (CBE)
IEC 60934:2000/A2:2013
2016-02-22
EN 60947-2:2006/A2:2013
Low-voltage switchgear and controlgear — Part 2: Circuit-breakers
IEC 60947-2:2006/A2:2013
2016-03-07
EN 60947-5-5:1997/A11:2013
Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function
2015-12-03
EN 60950-1:2006/A2:2013
Information technology equipment— Safety — Part 1: General requirements
IEC 60950-1:2005/A2:2013 (Modified)
2016-07-02
EN 60968:2013
Self-ballasted lamps for general lighting services — Safety requirements
IEC 60968:2012
2015-10-31
EN 60974-2:2013
Arc welding equipment — Part 2: Liquid cooling systems
IEC 60974-2:2013
2016-02-28
EN 60974-5:2013
Arc welding equipment — Part 5: Wire feeders
IEC 60974-5:2013
2016-06-27
EN 60974-7:2013
Arc welding equipment — Part 7: Torches
IEC 60974-7:2013
2016-02-28
EN 61010-2-201:2013
Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-201: Particular requirements for control equipment
IEC 61010-2-201:2013
2016-04-01
EN 61034-2:2005/A1:2013
Measurement of smoke density of cables burning under defined conditions — Part 2: Test procedure and requirements
IEC 61034-2:2005/A1:2013
2016-05-26
EN 61195:1999/A1:2013
Double-capped fluorescent lamps— Safety specifications
IEC 61195:1999/A1:2012
2015-11-16
EN 61199:2011/A1:2013
Single-capped fluorescent lamps— Safety specifications
IEC 61199:2011/A1:2012
2015-11-01
EN 61347-1:2008/A2:2013
Lamp controlgear — Part 1: General and safety requirements
IEC 61347-1:2007/A2:2012
2016-01-01
EN 61347-2-9:2013
Lamp controlgear — Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-9:2012
2015-12-04
EN 61439-4:2013
Low-voltage switchgear and controlgear assemblies — Part 4: Particular requirements for assemblies for construction sites (ACS)
IEC 61439-4:2012
2015-12-20
EN 61535:2009/A1:2013
Installation couplers intended for permanent connection in fixed installations
IEC 61535:2009/A1:2012
2015-06-20
EN 61557-10:2013
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. —Equipment for testing, measuring or monitoring of protective measures — Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures
IEC 61557-10:2013
2016-06-03
EN 61557-14:2013
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. —Equipment for testing, measuring or monitoring of protective measures —Part 14: Equipment for testing the safety of electrical equipment of machinery
IEC 61557-14:2013
EN 61558-2-14:2013
Safety of transformers, reactors, power supply units and combination thereof — Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
IEC 61558-2-14:2012
EN 61558-2-16:2009/A1:2013
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units
IEC 61558-2-16:2009/A1:2013
2016-09-16
EN 61558-2-26:2013
Safety of transformers, reactors, power supply units and combinations thereof — Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes
IEC 61558-2-26:2013
EN 61643-21:2001/A2:2013
Low voltage surge protective devices — Part 21: Surge protective devices connected to telecommunications and signalling networks — Performance requirements and testing methods
IEC 61643-21:2000/A2:2012
2015-08-31
EN 61730-1:2007/A2:2013
Photovoltaic (PV) module safety qualification — Part 1: Requirements for construction
IEC 61730-1:2004/A2:2013
2016-04-18
EN 62026-2:2013
Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 2: Actuator sensor interface (AS-i)
IEC 62026-2:2008 (Modified)
EN 62026-7:2013
Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 7: CompoNet
IEC 62026-7:2010 (Modified)
EN 62031:2008/A1:2013
LED modules for general lighting— Safety specifications
IEC 62031:2008/A1:2012
2015-12-03
EN 62040-1:2008/A1:2013
Uninterruptible power systems (UPS) — Part 1: General and safety requirements for UPS
IEC 62040-1:2008/A1:2013
2016-02-14
EN 62196-1:2012/A11:2013
Plugs, socket-outlets, vehicle connectors and vehicle inlets —Conductive charging of electric vehicles — Part 1: General requirements
2017-10-15
EN 62196-2:2012/A11:2013
Plugs, socket-outlets, vehicle connectors and vehicle inlets —Conductive charging of electric vehicles —Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
2017-10-15
EN 62395-1:2013
Electrical resistance trace heating systems for industrial and commercial applications —Part 1: General and testing requirements
IEC 62395-1:2013
2016-10-14
EN 62444:2013
Cable glands for electrical installations
IEC 62444:2010 (Modified)
2016-09-23
EN 62606:2013
General requirements for arc fault detection devices
IEC 62606:2013 (Modified)
HD 60269-2:2013
Low-voltage fuses — Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) —Examples of standardized systems of fuses A to K
IEC 60269-2:2013 (Modified)
2016-08-15
HD 60269-3:2010/A1:2013
Low-voltage fuses — Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) — Examples of standardized systems of fuses A to F
IEC 60269-3:2010/A1:2013
2016-03-05
粵公網安備 44010602010620號